Skil 7305 Instrucciones De Funcionamiento Y Seguridad página 12

SM 1619X04464 05-09:SM 1619X04464 05-09 5/20/09 1:54 PM Page 12
CHARGING BATTERy PACK (SC118 OR SC118B CHARGER)
Plug charger cord into your standard power
outlet, then slide the battery pack into charger
(Fig. 10).
The charger's green indicator will begin to
"BLINK". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the indicator light stops "BLINKING"
(and becomes a steady green light) fast
charging is complete.
* BUTTON
* B TTERY
CH RGE
CONDITION
INDIC TOR
LIGHTS
When you begin the charging process of the
battery pack, a steady green light could also
mean the battery pack is too hot or too cold.
The purpose of the light is to indicate that the
battery pack is fast-charging. It does not
indicate the exact point of full charge. The light
will stop blinking in less time if the battery pack
was not completely discharged.
When the battery pack is fully charged, unplug
the charger (unless you're charging another
battery pack) and slip the battery pack back
into the tool handle.
* NOT AVAILABLE ON ALL MODELS
B TTERY
P CK
-12-
FIG. 10
CH RGER
INDIC TOR LIGHT