Information On Electromagnetic Compatibility; Main Machine Components (Fig. 1); Machine Description (Fig. 1); Installation - Femi 510 Instrucciones De Uso

EN
1.9.

INFORMATION ON ELECTROMAGNETIC COMPATIBILITY

Electromagnetic emissions from the machine do not exceed the limits defi ned by the relative
standards for the envisaged conditions of use.
Testing was carried out in accordance with Standards EN 55014-1 and EN 55014-2.

1.10. MAIN MACHINE COMPONENTS (FIG. 1)

- (Fig. 1A: belt/disc sander)
- (Fig. 1B: belt sander)
(A) belt tension adjustment knob
(B) belt centring adjustment knob
(C) control panel
(D) sliding disc guard
(E) sanding belt/disc
(F) work surface
(G) dust collection manifold
(H) disc plane tilt adjustment knob
(I) base
(L). motor
(M) rest square
(N) workbench support (optional extra).
(O) sliding belt guard

1.11. MACHINE DESCRIPTION (Fig. 1)

The belt, disc or combined sanders are fi tted with tilting belt and/or disc equipment. They
come complete with control panel, adjustable guides and can be connected to a dust extractor
system.
Some models may be mounted on a special support pedestal while others come without.
For certain models a workbench support is available (optional extra).

2. INSTALLATION

2.1.

CONTENTS OF THE PACKAGING

Belt sander
• User Manual
• Supplementary insert
Disc sander
• User Manual
• Supplementary insert
Combined belt/disc sander
• User Manual
• Supplementary insert
26