Custom Program; Load Size Sensing System - LG WM2301H Serie Guía Del Usuario E Instrucciones De Instalacion

HOWTO USE
CUSTOM PROGRAM
CUSTOM PROGRAM allows you
to store a customized wash cycle
for future use. It allows you to save
favorite temperature, spin speed, soil
level, and other options for a cycle, and then
recall them at the touch of a button.
TOstore a Custom Program:
_1 Select a cycle.
O Adjust the Wash/Rinse Temperature, Spin
Speed, and Soil Level to the desired settings.
OI Set any other desired options.
_1 Press and hold the CUSTOM PROGRAM
button for 3 seconds. You will hear two
beeps to confirm the settings have been
stored.
IMPORTANT: If you press and hold the
CUSTOM PROGRAM button for 3 seconds, you
will overwrite any previously stored CUSTOM
PROGRAM.
TOrecall a Custom Program:
O Press and release the CUSTOM PROGRAM
button. The stored settings will be displayed.
O Press and release the START/PAUSE button
to start the cycle. The washer will start
automatically.
LOAD SIZE SENSING SYSTEM
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the
clothes. The display will indicate the
approximate load size in the LOAD SIZE
display. This allows you to adjust the
amount of detergent and other additives for best
results and improved efficiency.
f
_The LOAD SIZE display:
Example 1:If thewasher hasdetected a smallloadsize,the
display mayonlyshowonelightedbar.Onlya smallamount o f
detergent shouldbeused, b ecause theamount o f clothing and
thequantity ofwaterthatwill beusedis small.
B _ Detergent
Recommended__ manufacturer's
amount for I _ -Jl recommended
thisload =--=-4- _ _.Jl amount fora
fullload
Example 2: If thewasher hasdetected a largeloadsize,the
display mayshowall fourbarslighted. M oredetergent should
be used, b ecause theamount o f clothing andthequantity of
waterthat willbe usedis greater.
_ Detergent
Recommended manufacturer's
amount for===--_ Jl recommended
thisload l_ _1 amount fora
fullload
NOTE: Because t he washer u sesa verysmallamount o fwater,
careshould betakenwhendeciding howmuchdetergent
to use.Normal loadsonlyneedabouthalfthedetergent
manufacturer's recommended amount. Thissavesdetergent by
usingit in a moreconcentrated manner. However, for heavily
soiledloads, a dditional detergent shouldbeadded. N ever
exceed manufacturer
TO use Automatic Load Size Sensing:
01 Load the washer, select the desired cycle and
options, and then start the cycle by pressing the
START/PAUSE button.
_lThe washer will tumble for short time to detect
a
the size of the load. After the washer detects
the load size, the washer will show the detected
size in the LOAD SIZE display for 10 seconds
before it continues with the cycle.
_1 During the 10 second delay in step three, press
the START/PAUSE button to pause the cycle.
O Fill the detergent and additive compartments
of the detergent drawer with detergent/additive
amounts based on the load size the machine has
detected. Following these guidelines can save
detergent.
O Press the START/PAUSE button again to resume
the cycle.
To check the load size during the wash portion of the
cycle, press and hold the RINSE+SPIN button for 3
seconds. The LOAD SIZE display will be activated for
10 seconds.
NOTE: The load detection routine only works with dry
clothes. Since the detection system is detecting the
WEIGHT of the load, it will be affected by unusually
heavy articles in the load. For example, a garment
that is already wet that is loaded with other items will
cause the LOAD SIZE reading to be inaccurate.
If you do not desire to take advantage of the load size
detection feature, simply load the desired amount of
detergent and additives in the dispenser and start the
washer in the usual manner.
25