Playing A Bluetooth Device; Searching And Playing Tracks - Sony XAV-V750BT Manual De Instrucciones

Playing a BLUETOOTH Device

You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make a BLUETOOTH connection with the
audio device (page 9).
2
Press HOME, then touch [BT Audio].
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Notes
 Depending on the audio device, information such as
title, track number/time, and playback status may not
be displayed on this unit.
 Even if the source is changed on this unit, playback of
the audio device does not stop.
To match the volume level of the BLUETOOTH
device to other sources
You can reduce the volume level differences
between this unit and the BLUETOOTH device:
During playback, touch
between –10 and +15.
12
GB
, then set [Input Level]

Searching and Playing Tracks

Repeat play and shuffle play
1
During playback, touch
(shuffle) repeatedly until the desired play
mode appears.
Playback in the selected play mode may take
time to start.
Available play modes differ depending on the
selected sound source.
Direct search play
1
During USB playback, press the number
buttons on the remote commander to
enter an item (e.g., track) number, then
press ENTER on the remote commander.
Playback starts from the beginning of the
selected point.
Searching for a file from the list screen
1
During USB playback, touch
The list screen from the currently played item
appears.
Furthermore, touch
(photo) to list up by file type.
2
Touch the desired item.
Playback starts.
(repeat) or
.
(audio), (video), or