Operating An Ipod Directly (Passenger Control); Playing A Bluetooth Device; Searching And Playing Tracks - Sony XSP-N1BT Manual De Instrucciones

To remove the device
Stop playback, then remove the device.
Caution for iPhone
When you connect an iPhone via USB, phone call
volume is controlled by the iPhone, not the unit. Do
not inadvertently increase the volume on the unit
during a call, as sudden loud sound may result
when the call ends.
Operating an iPod directly (Passenger
control)
Press and hold MODE during playback until [MODE
IPOD] appears to enable operation by the iPod
directly.
Note that the volume can be adjusted only by the
unit.
To exit passenger control
Press and hold MODE until [MODE AUDIO] appears.

Playing a BLUETOOTH Device

You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make BLUETOOTH connection with the
audio device (page 7).
2
Press SOURCE to select [BT AUDIO].
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Notes
 Depending on the audio device, information such as
title, track number/time and playback status may not
be displayed on this unit.
 Even if the source is changed on this unit, playback of
the audio device does not stop.
 [BT AUDIO] does not appear in the display while
running the "App Remote" application via the
BLUETOOTH function.
To match the volume level of the BLUETOOTH
device to other sources
Start playback of the BLUETOOTH audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press SOUND, then / to select [BTA VOL]
(page 18).
12
GB

Searching and Playing Tracks

Repeat play and shuffle play
1
During playback, press
Repeat play, or
play.
2
Press (repeat) or
repeatedly to select the desired play
mode.
Playback in selected play mode may take time
to start.
Available play modes differ depending on the
selected sound source.
Searching a track by name (Quick-
BrowZer™)
1
During CD, USB or BT audio device*
playback, press
the list of search categories.
When the track list appears, press
repeatedly to display the desired search
category.
*1 Available only for audio devices supporting
AVRCP (Audio Video Remote Control Profile) 1.4
or above.
*2 During USB playback, press
more than 2 seconds to directly return to the
beginning of the category list.
2
Press / to select the desired search
category, then press ENTER to confirm.
3
Repeat step 2 to search the desired track.
Playback starts.
To exit the Quick-BrowZer mode
Press (browse).
(repeat) for
(shuffle) for Shuffle
(shuffle)
1
(browse)* 2 to display
(back)
(browse) for