Faqs - Panasonic VIERA TC-L42E30H Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
White spots or shadow images (noise)
Check the position, direction, and
connection of the aerial.
Neither image nor sound is produced
Is the TV in "AV mode"?
Is the mains lead plugged into the
socket outlet?
Is the TV turned On?
Check the Picture Menu (p. 23 - 24) and
volume.
Check all required cables and
connections are firmly in place.
An error message appears
Follow the message's instructions.
If the problem persists, contact your
local Panasonic dealer.
Problem
Chaotic image, noisy
No image can be
displayed
Blurry or distorted
image
(no sound or low
volume)
Unusual image is
displayed
No sound is produced
Sound level is low or
sound is distorted
The LCD panel moves slightly when it is pushed with
a finger Clattered sound might be heard
There are some looseness around the panel to prevent
the damage to the panel.
The panel might move slightly when it is pushed with a
finger, and clattered sound might be heard. This is not
a malfunction.
There may be red spots, blue spots, green spots and
black spots on the screen
This is a characteristic of liquid crystal panels and
is not a problem. The liquid crystal panel is built
with very high precision technology giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed point of red,
green, blue or black. Please note this does not affect
the performance of your LCD, and it is not a quality
problem.
Change the setting of [P-NR] in the Picture Menu (to remove noise).
(p. 23)
Check nearby electrical products (car, motorcycle, fluorescent lamp).
Is [Colour] or [Contrast] in the Picture Menu set to the minimum?
(p. 23)
Reset channels
(p. 31, 32)
Turn the TV Off with Mains power On / Off switch, then turn it On
again.
Is "Sound Mute" active?
Is the volume set to the minimum?
Sound signal reception may be deteriorated.
Actions
(p. 11)
69

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido