Operating Elements - Mettler Toledo iLink Multi Manual De Instrucciones

en Instruction manual
en
14
1 Introduction
The iLink™ Multi is a universal device for connecting digital ISM
to a PC/laptop running iSense™ software.
iLink Multi contains precision ambient pressure and relative humidity sensors for simplifying
the calibration process of oxygen and dissolved oxygen sensors. Also, a connection terminal
to attach an external temperature probe is available to increase calibration convenience.
2 Technical data iLink Multi
Measurement parameters
Communication to PC
Sensor communication
Relative humidity
Environmental temperature
* P/N 59 902 168 to order the AK9 / 1 m / BNC 5 0 cable
** P/N 30 355 582 to order the iLink Multi cable / Set oDO (RS 4 85)
3

Operating elements

iLink Multi
30 370 185
p H, amperometric gas and dissolved oxygen, optical dissolved
oxygen (oDO), CO
2
USB (cable included)
1-wire (AK9 / BNC50 cable not included)*
RS 4 85 (iLink Multi cable / Set oDO not included)**
5 ... 95 % rH (non-condensing)
–15 to +50 °C
iLink Multi
® sensors (1-wire; RS 4 85)
© 04 / 17 Mettler-Toledo GmbH
Printed in Switzerland