Allview H4 Join Manual De Usuario página 21

In order to use the SOS function, please follow the steps below:
1. Set your emergency contacts in the order od priority you wish them to be contacted.
Activate /deactivate location – we strongly recommend activating your locations, in this
2.
way you permit sending your coordinates via SMS in case of emergency.
Activate /deactivate sound notification at the startup of SOS function – you will be
3.
notified with a beep when it turns on.
4. Edit emergency message you want to convey.
In case of emergency, press and hold for more than 3 seconds the SOS button. The emergency
operation wil automatically start as follows:

Calling the emergency contacts in the priority you have set before; the calling procedure
will stop as soon as one of the contacts will answer the incoming call;

Automatic send of the SOS message, set before, to all your SOS contacts
Notes:
• If you accidentally press the SOS button, click the button indicated in the notice to cancel the
operation of emergency. Attention, notification will be displayed for several seconds, then it will
trigger emergency operation.
21 En