Assembly; Risk Of Injury; Overview Of The Mixing Tools - Ambiano MD 19516 Manual Del Usuario

Assembly

CAUTION!

Risk of injury!

Improper handling of the product may cause injury.
− Make sure the product is placed on a stable, flat surface.
− Do not connect the product to an outlet during assembly.
− Be careful when lowering the tilting arm. You may
accidentally pinch your fingers and hands.
− Always secure the mixing bowl to the base before operation.
Never press the release button during operation.
1. Set the control dial
to raise the tilting arm
2. To attach the splash guard
7
head . Pull the front and back of the splash guard up until they click and
lock into the indentations on the mixer head (see Fig. B).
3. Place the mixing bowl
clockwise (in the direction indicated by the LOCK arrow) to lock the mixing
bowl in place (see Fig. C).
4. Fit the desired mixing tool (dough hook
into the drive shaft
lugs (see Fig. D). Push the mixing tool all the way up and rotate it counter-
clockwise to secure it to the drive shaft (see Fig. E).
5. Press the release button and push the tilting arm down. Make sure that the
mixing bowl is locked securely into the bracket in the base.
6. The product is assembled and ready for operation.

Overview of the mixing tools

Tool
Dough hook
9
Flat beater
10
Wire whisk
11
3
to speed setting 0 and press the release button
1
.
8
, align the notch with the tab on the mixer
5
into the bracket in the base
6
. To do so, align the guide grooves with the guidance
Use the dough hook for mixing and kneading heavy
dough at speed 1, 2 or 3.
Use the flat beater for ingredients ranging from medium
weight dough to lighter mixtures at speed 4, 5 or 6.
Use the wire whisk for mixtures that need air
incorporated at speed 4 or 6.
9 10
, flat beater
Use
Assembly
4
and rotate it
11
or wire whisk
2
)
15