Disposal Information; Declaration Of Conformity; Warranty; Exemption From Liability - MIRKA PS 1437 Instrucciones De Funcionamiento

Polisher PS 1437

Disposal information

WARNING!
Render redundant power tools unusable
by removing the power cord.
EU countries only
Do not throw electric power tools into
the household waste!
In accordance with the European Directive
2012/19/EC on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
NOTE!
Please ask your dealer about disposal
options!

-Declaration of Conformity

We declare under our sole responsibility
that the product described under "Technical
Data" conforms to the following standards or
normative documents:
EN 60745 in accordance with the
regulations of the directives 2004/108/EC
(until 19.04.2016), 2014/30/EC (from
20.04.2016), 2006/42/EC, 2011/65/EC.
Responsible for technical documents:
KWH Mirka LTD
FIN-66850 JEPPO
Stefan Sjöberg, CEO
11.11.2015
KWH Mirka LTD; FIN-66850 JEPPO

Warranty

When a new machine is purchased, Mirka
issues the end user with a 2+1 year manu-
facturer's warranty which comes into force
on the date the machine was purchased.
The guarantee covers only defects which
can be attributed to a material and/or
production fault as well as non-performance
of warranted characteristics. When making
a claim under the guarantee, enclose the
original sales receipt with purchase date.
Repairs under the guarantee may be carried
out only by workshops or service centres
authorised by Mirka. A claim may be made
under the guarantee only if the power tool
has been used as intended.
The guarantee excludes in particular
operational wear, improper use, partly or
completely dismantled products as well as
damage caused by overloading the product,
use of non-permitted, defective or
incorrectly used application tools.
Damage which is caused by the product
on the application tool or workpiece, use of
force, consequential damage which can
be attributed to improper or inadequate
maintenance on the part of the customer or
a third party, damage caused by external
effects or foreign objects, e.g. sand or
stones, as well as damage caused by non-
observance of the operating manual, e.g.
connection to an incorrect mains voltage or
current type. Claims for insertable tools or
accessories can only be made under the
guarantee provided they are used with
products for the intended or permitted use.

Exemption from liability

The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused by
the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool or
by use of the power tool with products from
other manufacturers.
65