Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY INSTRUCTIONS
CONTINUED
18. STAY ALERT. Inattention on the part of the operator may lead to serious
injury.
19. CHECK DAMAGED PARTS. Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine that it
will operate properly and perform its intended function – check for
alignment of moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect it's operation. A guard
or other part that is damaged should be properly repaired or replaced.
PRODUCT SPECIFIC SAFETY
INSTRUCTIONS
1.
Do not lock trigger into the ON position unless drill is properly secured.
This drill is a powerful, high-torque tool.
2.
Always keep auxiliary pipe handle in place to maintain control of drill.
3.
Do not use heavy-duty drills while standing on ladders or other unstable
places.
4.
CAUTION: DO NOT touch the chuck or gear case housing while drilling
into walls. A chuck or other metal part on the drill may be made "live" if
drilled into wiring concealed in the wall.
5.
Use recommended accessories. The use of improper accessories may
cause risk of injury.
PRODUCT INTRODUCTION
• Designed for mixing thinset, grout and mortar
• Variable-speed dial
• Heavy-duty, professional quality
• Powerful 6-amp motor
• Precision 5/8" chuck
• Die-cast aluminum gear housing
• Ball-bearings
• High-torque, double-reduction gears
• Chuck keyholder in case
• Trigger lock
• Auxiliary handle
• Use with QEP mixing paddles
- 4 -
Publicidad
Tabla de contenido
