Tabla De Contenido; General Safety Instructions - QEP 83200Q Instrucciones De Funcionamiento

TABLE OF CONTENTS
General Safety Instructions . . . . . . . .1-3
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical Requirements . . . . . . . . . . . .3-4
Extension Cords . . . . . . . . . . . . . . . . . . . . 4
California Proposition 65 . . . . . . . . . . . . 4
Description . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly . . . . . . . . . . . . . . . . . . . . . . . .5-7
Functional Description
and Operation . . . . . . . . . . . . . . . . . . . .7-9
Maintenance . . . . . . . . . . . . . . . . . . . .9-10
Troubleshooting . . . . . . . . . . . . . . . . .10-11
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . 12
Exploded Parts . . . . . . . . . . . . . . . . . . . . 13
GENERAL SAFETY
INSTRUCTIONS
MANUAL COMPLETELY AND MAkE
SURE YOU UNDERSTAND ALL OF IT'S
SAFETY GUIDELINES.
1 . KEEp guArdS In pLAcE and in
working order .
2 . rEmovE AdJuSTIng KEyS And
WrEnchES. Before turning on the tile
saw, make sure the keys and adjusting
wrenches have been removed .
3 . KEEp WorK ArEA cLEAn. Cluttered areas
and benches invite accidents .
4 . ALWAyS rEmAIn ALErT WhEn ThE SAW
IS In uSE. Inattention on the part of the
operator may lead to serious injury .
5 . don'T uSE In A dAngErouS
EnvIronmEnT . Don't use power tools in
damp or wet locations or expose them to
rain . Keep work area well lit .
6 . KEEp chILdrEn AWAy. All visitors should
remain at a safe distance from work area .
24 IN. BRIDGE SAW
OWNER'S MANUAL
READ THIS OWNER'S
7 . mAKE WorKShop chILd-proof with
padlocks, master switches or by removing
starter keys .
8 . uSE ThE rIghT TooL. Don't force a tool
or attachment to do a job for which it was
not designed .
9 . uSE ThE propEr EXTEnSIon cord.
Make sure your extension cord is in good
condition . When using an extension cord,
be sure to use one heavy enough to carry
the current your product will draw . An
undersized cord will cause a drop in line
voltage resulting in loss of power and
overheating . TABLE 1 (page 4) shows the
correct size to use depending on cord
length and nameplate ampere rating . If
in doubt, use the next heavier gauge . The
smaller the gauge number, the heavier
the cord .
10 . don'T forcE ThE TooL. It has been
designed to operate at maximum safety and
performance levels .
11 . do noT forcE ThE mATErIAL bEIng cuT.
Always let the blade cut at its own speed .
12 . WEAr propEr AppArEL. Do not wear
loose clothing, neckties, rings, bracelets
or other jewelry which may get caught
in moving parts . Non-slip foot wear is
recommended . Wear protective hair
covering if you have long hair .
13 . ALWAyS uSE SAfETy gLASSES. Also use
face or dust mask for commercial cutting
operations . Everyday eyeglasses only have
impact-resistant lenses, they are NOT
safety glasses .
14 . don'T ovErrEAch. Keep proper footing
and balance at all times .
15 . mAInTAIn TooLS WITh cArE. Keep tools
clean and in good working condition for
maximum safety performance .
16 . dISconnEcT SAW bEforE SErvIcIng
- when changing accessories, such as
blades, bits, cutters, etc .
- 1 -