Safety First - GBC ShredMaster GLS28 Manual De Instrucciones

Lights and Icons Explained
Color of LED
Power on button pushed / no fault
Door open
Bin full
Auto button pushed / shredding
Forward jammed
Reverse jammed
Reverse button pushed
Auto mode
Thank you for choosing this shredder from GBC. We are sure it will serve you well, but please take a little time to study these instructions to ensure you get the best out of your machine.
a Indicator Panel
b Door for Bin
c Wheels
d Power On Button
e Auto Feed Button
f Reverse Button
g CD Slot

Safety First

Shredders are safe to use as long as you take a few safety precautions.
• Ensure the machine is plugged into an easily accessible power outlet, and ensure
the cable is not likely to trip up a passer by.
• Any attempt to repair this unit by unqualified personnel will invalidate the warranty.
Please return to supplier.
• Unplug your shredder before moving it or when it is not in use for an extended
period of time.
• Do not operate with a damaged power supply cord or plug, after it malfunctions, or
after it has been damaged in any manner.
• Do not overload electrical outlets beyond capacity as this can result in fire or
electrical shock.
• The socket-outlet should be installed near the equipment and shall be easily
accessible.
• Do not alter the attachment plug. The plug is configured for the appropriate electrical
supply.
• Do not use near water.
• Do not use aerosol dusters or cleaners.
• Do not spray anything into the shredder.
Although this shredder has been designed to be child safe, it is not advised to operate
the machine near children.
Service
We recommend these machines are serviced every 6-12 months by a GBC service
engineer - see the back of this booklet for the contact details of your local service
center.
4
GLHS9_GLM11_GLX20_GLS28_Manual.indd 4
1 2 3
Power Reverse Door
on open
Green Red Red
flash
flash (6 seconds) flash (6 seconds) flash (6 seconds)
light light
light
light
flash light
flash light
light light
light
m
4
Bin
full
Red
light
1 Power On
2 Shredder not OK
3 Door Open
4 Bin Full
Door Open Safety Function
If the door is opened during shredding as a safety precaution the shredder will instantly
stop, and the door open symbol on the indicator panel will flash red. To turn back to
auto mode simply press the right hand auto feed button again (e).
Auto reverse on jamming
In the unlikely event of the shredder jamming, the shredder will automatically reverse
the jam out of the shredder mouth.
Alternating between the reverse function and the forward run (Hold Auto start for 2
seconds) will help unblock the feed area.
Once the jam is clear, press the auto button once to revert back to auto mode. You can
now resume shredding as normal.
Use GBC shredder paper waste bags to recycle shredded paper (1765021) or plastic
waste bag (1765015). There are instructions on the paper waste bag on how to fit it
to the internal bag support frame. A complimentary waste paper bag is included with
the shredder. To maintain maximum product performance, we recommend that the
shredder is lubricated using GBC oil (1760049). The more often the shredder is used,
the more frequently you should lubricate the shredder.
8/26/08 12:36:10 PM