Important Safety Instructions - GBC ShredMaster SC032 Manual De Instrucciones

GBC5151 SC032-CC055 Manual EU
ShredMaster

Important safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS
IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL AND
ON THE PRODUCT ARE IMPORTANT SAFETY MESSAGES.
READ THESE MESSAGES CAREFULLY.
THE SAFETY ALERT SYMBOL PRECEDES EACH
SAFETY MESSAGE IN THIS INSTRUCTION
MANUAL AND ON THE PRODUCT. THIS SYMBOL
INDICATES A POTENTIAL PERSONAL SAFETY
HAZARD THAT COULD HURT YOU OR OTHERS,
AS WELL AS CAUSE PRODUCT OR PROPERTY
DAMAGE. DO NOT CONNECT HIS UNIT TO
ELECTRICAL POWER OR ATTEMPT TO OPERATE
IT BEFORE YOU HAVE READ THESE OPERATING
INSTRUCTIONS. SAVE THESE INSTRUCTIONS
FOR LATER USE.
THIS WARNING IS FOUND ON THE PRODUCT.
Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.
This safety message means that you could be seriously hurt
or killed if you open the Product and expose yourself to
hazardous voltage.
THIS WARNING IS FOUND ON THE CROSS-CUT
VERSION ONLY.
This safety message means that you could be seriously hurt if
you place your hands in the discharge area.
The following ISO and IEC symbols appear on this product,
and their meanings are as follows:
19/12/05
® SC032/CC055
ATTENTION
WARNING
Sharp blades above.
Keep hands away from
discharge chute. Do not
attempt to defeat safety
interlock switch.
On/Auto
Forward
Reverse
11:34 Page 3
This means you should be careful because long hair
can become entangled in the cutting head. This could
hurt you
This means don't reach into the feed opening of the
cutting head. This could hurt you
This means be careful of ties and other loose clothing
which could become entangled in the cutting head.
This could hurt you.
This means you should be careful of loose jewellery
which could become entangled in the cutting head.
This could hurt you.
Electrical safeguards
• Unplug your shredder before moving it, emptying the shred
bag, or when it is not in use for an extended period of time.
• Do not operate with a damaged power supply cord or plug,
after it malfunctions, or after it has been damaged in any
manner.
• Do not overload electrical outlets beyond capacity as this
can result in fire or electrical shock.
• The socket-outlet should be installed near the equipment
and shall be easily accessible.
• Do not alter the attachment plug. The plug is configured for
the appropriate electrical supply.
• Do not use near water.
• Keep out of reach of children.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
WARNING
Do NOT use aerosol dusters or cleaners
Do NOT spray anything into the shredder
Foreign substances can be explosive