Important Safety Instructions - GBC Shredmaster Instrucciones De Manejo

0

IMPORTANT SAFETY INSTRUCTIONS

Your safety as well as the safety of others is important to GBC. In this instruction manual and on the product
are important safety messages. Read these messages carefully.
The safety alert symbol precedes each safety message in this instruction manual and on the product.
!
This symbol indicates a potential personal safety hazard that could hurt you or others, as well as cause
product or property damage. Do not connect this unit to electrical power or attempt to operate it before
you have read these operating instructions. Save these instructions for later use.
The following two warnings are found on the bottom of the product:
This safety message means that you could be
seriously hurt or killed if you open the product
and expose yourself to hazardous voltage.
The following ISO and IEC symbols appear on this
product, and their meanings are as follows:
Means Power ON
Means OFF
R
Means REVERSE
This means you should be careful because long hair can become entangled in the cutting head.
This could hurt you.
This means don't reach into the feed opening of the cutting head. This could hurt you.
This means be careful of ties and other loose clothing which could become entangled in the cutting
head. This could hurt you.
This means you should be careful of loose jewelry which could become entangled in the cutting head.
This could hurt you.
ELECTRICAL SAFEGUARDS
• Unplug your shredder before moving it, emptying the shred bag, or when it is not in use for an extended
period of time.
• Do Not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been
damaged in any manner.
• Do NOT overload electrical outlets beyond capacity as this can result in fire or electrical shock.
• The socket-outlet should be installed near the equipment and shall be easily accessible.
• Do NOT alter attachment plug. Plug configured for the appropriate electrical supply.
This safety message means that you could be
seriously hurt if you place your hands in the
discharge shoot.
The symbols which become illuminated are:
Means Power ON
Means the shred bin is full
Means the cabinet door is open
Means an overload has occurred
R
Depress the "R" side of the rocker switch
2 2