Insert Batteries - TFA Dostmann METEO MAX Instrucciones De Uso

TFA_No. 35.1066_Anleitung 11.11.2016
METEO MAX - Wireless weather station
4. For your safety
• This product is exclusively intended for the field of application described above. It should only be used as described within
these instructions.
• Unauthorized repairs, modifications or changes to the product are prohibited.
Caution!
Risk of injury:
• Keep these instruments and the batteries out of the reach of children.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent damage caused by leak-
ing. Never use a combination of old and new batteries together, nor batteries of different types. Wear chemical-resistant
protective gloves and safety glasses when handling leaking batteries.
Important information on product safety!
• Do not place your product near extreme temperatures, vibrations or shocks.
• Protect it from moisture.
• The outdoor transmitter is protected against splash water, but is not watertight. Choose a shady and dry position for the
transmitter.
5. Elements
5.1 Receiver (Display unit)
LCD (Fig. 1)
A 1: Indoor temperature and humidity with comfort level indicator
A 2: Absolute and relative atmospheric pressure with history and trend indicator
A 3: Bar graph indication of atmospheric pressure for the last 12 hours
A 4: Weather forecast by symbols and "Meteo Max"
A 5: Outdoor temperature with channel number and trend indicator
A 6: Radio controlled time with day and date
A 7: Time of rising of sun and moon
A 8: Moon phase
A 9: Time of setting of sun and moon
A 10: Location
18
11:47 Uhr Seite 10
METEO MAX - Wireless weather station
Buttons(Fig. 1+2)
B 1: SUN/MOON button
B 2: +(12/24) button
B 3: MODE button
B 4: – button
B 5: AL ON/OFF button
B 6: CHANNEL button
B 7: HISTORY/WEATHER button
B 8: ▲ (°C/°F) button
B 9: ▼ button
B 10: Relative/Absolute button
B 11: MAX/MIN button
B 12: RESET button
Housing (Fig. 2)
C 1: Wall mount hole
C 2: Battery compartment
C 3: Stand (fold out)
5.2 Sensor unit (Transmitter) (Fig. 3)
D 1: Transmission indication LED
D 2: Outdoor temperature
D 3: Wall mount hole
D 4: CHANNEL selecting switch
D 5: Battery compartment
D 6: °C/°F button
D 7: TX button
D 8: Stand (fold out)
D 9: Temperature sensor cable
6. Getting started

6.1 Insert batteries

• Open the battery compartment of the display unit and the transmitter and place both instruments on a desk with a distance
of approximately 1.5 meter. Check that no other electronic devices are close.
19