Denon DJ MC4000 Guia Del Usuario página 5

10. Play/Pause / Stutter: This button pauses or resumes playback.
Press and hold Shift and then press this button to "stutter-play" the track from the last set
cue point.
11. Hot Cues: Press any of these 4 pads to set and jump to a hot cue point. To set a hot cue
point, press an unlit pad at the desired location in the track (the pad will then be lit). To jump
to that hot cue point, press the lit pad. To delete a hot cue point, press and hold Shift and
then press a lit pad.
12. Pad Mode: Use this button to access advanced pad modes when using Serato DJ.
13. Platter: This capacitive, touch-sensitive platter controls the audio playhead when the wheel
is touched and moved. When the Vinyl button is on, move the platter to "scratch" the track
as you would with a vinyl record. When the Vinyl button is off (or if you are touching only the
side of the platter), move the platter to temporarily adjust the track's speed.
While editing a loop, move the platter to adjust the Loop In or Loop Out point.
Press and hold Shift and then move the platter to move quickly through the track.
14. Vinyl / Censor: Press this button activate/deactivate a "vinyl mode" for the platter. When
activated, you can use the platter to "scratch" the track as you would with a vinyl record.
Press and hold Shift and then press and hold this button to activate the Censor feature:
the playback of the track will be reversed, but when you release the button, normal
playback will resume from where it would have been if you had never engaged the Censor
feature (i.e., as if the track had been playing forward the whole time).
15. Key Lock / Range: Press this button to activate/deactivate Key Lock. When Key Lock is
activated, the track's key will remain the same even if you adjust its speed.
Press and hold Shift and then press this button to cycle through the available ranges of
the pitch fader.
16. Pitch Bend -/+ / /: Press and hold one of these buttons to momentarily reduce or
increase (respectively) the speed of the track.
Press and hold Shift and then press and hold one of these buttons to rewind or fast-
forward (respectively) through the track.
17. Pitch Fader: Move this fader to adjust the speed (pitch) of the track. You can adjust its
total range with the Key Lock / Range button.
18. FX Level: Turn this knob to adjust the level of the corresponding effect. The FX On button
under the knob must be lit for this knob to function.
Press and hold Shift and then turn this knob to scroll through the list of effects.
19. FX Beats: Turn this knob to adjust the rate of time-based effects on that deck.
20. FX On / Select: Press this button to turn the corresponding effect on or off. Press and
hold Shift and then press this button to select an effect in the software.
21. FX Tap: Tap this button repeatedly at the desired tempo to set the rate of the effects' low-
frequency oscillators (LFOs). Press and hold this button to reset Beat Multiplier to the
Deck's BPM.
22. Auto-Loop / Auto 4: Press this button to create an auto-loop with the length that is set in
the software. Press and hold Shift and then press this button to create a 4-bar auto-loop,
regardless of the auto-loop length setting.
23. X 1/2 Loop / Loop In: Press this button to halve the length of the current loop. Press and
hold Shift and then press this button to create a Loop In point at the current location.
24. X 2 Loop / Loop Out: Press this button to double the length of the current loop. Press and
hold Shift and then press this button to create a Loop Out point at the current location.
25. Reloop: Press this button to to skip to the last-played loop and activate it immediately.
5