York EADC-09FSAAR Instrucciones De Instalación página 67

Timer changing:
If the system is under timer state, the unit can be turned on/off by ON/OFF button on remote controller. Timer can be reset and the
system will run according to the final setting.
If timer ON and timer OFF are set at the same time under running status of the system, the system will keep the current running status.
When timer OFF reaches, the system will be stopped.
If timer ON and timer OFF are set at the same time under OFF state of the system, the system will keep the current stopping status.
When time ON reaches, the system will start running.
Later, the system will run in setting mode when time ON reached and will be stopped when timer OFF reaches. If the setting time
for timer ON and timer OFF is the same, time OFF previals.
(2) Auto Button
this button
fan speed. T
(3)Buzzer
Upon energization and operation, the buzzer will give out a beep.
(4)Sleep Function
function increase
run this setting
the unit ontinue to run
(5) Turbo Function
(6) Blow Function
blow
(7) Automatic Control of Fan Speed
(8)Swing Motor Control
the unit
swing
guide louver
running at
run running
setting
1 . It will increased by
setting
It will be decreased by
this setting
guide louver
& guide louver
the unit
when turing off the unit
ler
o run
be ped
increase
at all
at all
this isn't available for cooling only unit
& guide louver
guide louver
to the auto
this button
the unit e to
outlet
guide louver
guide louver
607