Operating Manual - Infrared Thermometer Bp05; Description Of The Device; Operation - Trotec BP05 Manual De Instrucciones

Description of the device

Functional description
The infrared thermometer BP05 uses an infrared sensor to
measure surface temperatures without contact. The resulting
measurement can be viewed on the screen in Celsius and
Fahrenheit.
4
3
1. "°C/°F" key
3. Display
Display
8
5. Battery indicator
6. Temperature is shown in °C
7. Temperature is shown in °F
8. Current measured value
B - 2
1
2
2. IR sensor
4. "MEAS" key
Operating manual – Infrared thermometer BP05

Operation

Temperature measurement
• Ensure that the surface to be measured is free of dust, dirt or
similar substances.
• To be able to gain exact measurement results on surfaces
which reflect heavily, stick matt masking tape to the surface or
apply matt black paint with a very high and known degree of
emission.
• Note the 1:1 ratio of the distance to the measuring spot size.
The larger the distance to the object, the larger the measuring
points size and hence, the less precise the measured result.
1. Point the device at the object to be measured and hold down
the "MEAS" key (4).
– The device turns on and carries out a measurement.
The current measured value is shown.
The device switches off after approx. 15 seconds without being
used.
Settings
Changing the display °C - °F
Press the "°C/°F" key (3) to change between the units for the
measured values.
5
6
7
EN