Preset Tuning - Teac CR-H226 Manual Del Usuario

4
3
5
2
You can store up to 30 FM, 30 AM stations.
Preset Manually
1 Select AM or FM by pressing the BAND button.
2
Tune the station you would like to store.
3
Press the MEMORY button.
"CH01" or "01" blinks on the display.
4
Within 4 seconds, select the preset you would
like to use for this station using the PRESET
buttons.
30

Preset Tuning

< When you use the numeric buttons, press the input
1
1
4
5
< If you don't press the MEMORY button within 4
Preset Automatically
1
2
You can also use the numeric buttons.
selector button of the remote control first.
For instance, to select preset number 25, first
press the TUNER button, and then press "2"
and "5".
To select numbers less than 10, press "0" and then
the number. As an example, to select number 5,
press "0" and "5". (Optionally, you may press just
the number "5" and then wait a few seconds.)
Within 4 seconds, press the MEMORY button.
seconds after selecting the channel, the selection
will be canceled.
To store more stations, repeat steps
Select AM or FM by pressing the BAND button.
Press the MEMORY button for more than 3
seconds.
Up to 30 of the best received stations in your area
will be stored automatically.
1 to 5 .