Setting The Clock - Teac CR-H226 Manual Del Usuario

1 Press the TIME MODE button.
Every time the TIME MODE button is pressed, the
mode is changed as follows.
Current time
On time
Off time
Source select
< The unit uses the 24-hour "military" clock.
< When no action is taken for 1 minute, the time
adjust mode will be cancelled.
< Press the stop button (H) to cancel the time setting.
2 Press the TUNING/PRESET/TIME buttons to set
the current hour.

Setting the Clock

TUNING/PRESET/
TIME
ENTER
TIME MODE
3 Press the ENTER button.
The "minute" value blinks.
4
Press the TUNING/PRESET/TIME buttons to set
the current minute.
5
Press the ENTER button.
The clock starts from 00 seconds.
35