Product Description - Chauvet DJ INTIMIDATOR BEAM 140SR Guía De Referencia Rápida

Product Description

The Intimidator Beam 140SR is a compact, cutting edge moving head beam with an intense 140 W discharge lamp that is
perfect for mobile applications. Maximize lighting options with separate color and gobo wheels, two DMX personalities,
sound-active and auto modes, and master/slave mode. Infrared technology offers easy wireless control with the optional
IRC-6 remote.
Overview
LCD
Display
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of Intimidator Beam 140SR products that you can power link at each voltage, see the User
Manual or the sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Intimidator Beam 140SR QRG Rev. 2
QUICK REFERENCE GUIDE
Safety Menu
Loop Buttons
Safety Notes.
(such as CLP-15 from Chauvet)
Rubber Feet for Floor Mounting
Infrared
Sensor
LED
Indicator
Carry Power
Handles In
Mounting Clamp
Mounting Bracket
Safety Cable
(such as CH-05 from
Chauvet)
(x4)
Power Fuse
Out Holder
EN
DMX
In/Out
2