Medisana ITM Instrucciones De Manejo página 16

GB
2 Useful Information / 3 Operating
3.1
Getting started
3.2
Starting the
Massager
3.3
Adding infrared
heat
3.4
Controlling
the massage
intensity
16
If desired, infrared heat can be added through both of the large massage
heads. This is a very pleasant heat treatment, which increases the positive ef-
fects of the massage. ITM radiates the infrared heat through the skin to the
underlying tissues. Thereby, both massage heads get warm but not hot.
The infrared heat of the MEDISANA Intensive Massager creates a particularly
pleasant feeling. This singular combination of an intensive massage with infra-
red heat treatment makes ITM a very effective massager.
Ensure that the appliance is switched off ("0" is visible above the grey switch
on the appliance's top side) before plugging into the mains. Then plug into
an appropriate socket (230 V).
Push the switch just above the handle with your thumb one notch forward.
The appliance switches on and you feel the vibration of the tapping massage.
The letter "M" (for massage) is visible.
Massage on
Infrared heat can be added by pushing the gray switch
forward. The infrared heat comes on and the letter "M/H" (for massage/
heat-infrared) is visible on the switch.
The massage intensity can be regu-
lated to suit your sensitivity. Just turn
the rotary knob
ON/OFF-switch. You can adjust the
massage intensity continuously from
1
a minimum (2000 /
min
1
mum (3000 / ).
min
above the
) to a maxi-
Massage with
Infrared Heat on
another notch
Massage Intensity Rotary knob