3.5
Application
3.6
The massage
3.7
Using the
attachments
3.8
Switching off
the unit
Massage with the ITM
• You can give yourself or a partner a massage. Switch the unit on as
described above and apply to the part of body to be massaged. Do not use
pressure; just place it lightly on the body. The massager will do the mas-
saging for you. Do not concentrate on one side of the body for too long;
rather change the area of massage frequently.
• Choosing the direction of the massage you can decide on the effect: a mas-
sage toward the heart relaxes, a massage away from the heart stimulates.
• For a full body massage, please refer to "Safety Information".
• Each session should not be more than 20 minutes. To ensure positive results,
please use the massager regularly.
• The application should feel pleasant. In case you experience pain or find the
massage disagreeable, please interrupt the session and consult your doctor.
• After treatment, switch the massage device off, pull out the mains plug and
let the device cool down.
Using the point massage
pressure on the part of the body being massaged that is similar in nature to
that of a fingertip or acupressure massage.
Switch the appliance off. Place the desired massage attachments on massage
heads
and switch the appliance back on. Carry out the massage as de-
scribed in Section 3.6.
Caution!
You must not switch on the infra-red function when
using the attachments.
You can switch off the unit by sliding back the grey switch
visible once more. Once you have finished treatment, unplug the unit from the
mains outlet.
Massage with the ITM, with Infrared Heat on
or acupressure attachments
3 Operating
, the unit can exert
until the "0" is
17
GB