Information On Electromagnetic Compatibility (Emc); Environmental Conditions; Storage And Transport Conditions - Chattanooga Cefar TENS Manual Del Usuario

4 0 C e F A R t e n s e n
1 1 . 1 . 3 I n f o r m at i on on elec tro m a gn etic com pa ti b i li t y ( e M C )
The CEFAR TENS is designed to be used in typical environments that have been approved in
accordance with the EMC safety standard EN 60601-1-2.
This device complies with the CISPR standard, indicating that radio frequency (RF) emissions are not
likely to cause interference with electronic equipment installed nearby (radios, computers, telephones, etc.).
The CEFAR TENS is designed to withstand foreseeable disturbances from electrostatic discharge,
magnetic fields from the mains power supply or RF transmitters.
Nevertheless, it is not possible to ensure that the stimulator will not be affected by mobile powerful
RF (radio frequency) fields from other sources.
For more detailed information concerning electromagnetic emissions and immunity, refer to the EMC
tables.
1 1 . 1 .4 e n v ir o n men tal c on diti on s

storage and transport Conditions

The device must be stored and transported in accordance with the following conditions:
temperature: -20°C to 70°C
Maximum relative humidity: 75%
Atmospheric pressure: 700 hPa to 1,060 hPa
Conditions of use
temperature: 10°C to 40°C
Maximum relative humidity: 30% to 75%
Atmospheric pressure: 700 hPa to 1,060 hPa