Overview
Installation
Use
Maintenance
Warranty
3. The main menu.
Navigate the MENU
OK
Access the
Follow the instructions on
Decrease
Increase
Validate
settings
the screen
the values
the values
Occasionally increase the production of hot water:
Set the number of days of BOOST operation (from 1 to 7).
The water heater resumes its initial operation at the end of the selected time period.
The BOOST can be stopped at any time:
Stop the BOOST
Choose the operating mode:
Select AUTO or MANUAL (see "Operating modes" paragraph)
Schedule an absence:
Provides indications to the water heater concerning
• a permanent absence starting from the current date.
• a scheduled absence (set the start and end date of the
absence). The day before your return, an anti-legionella cycle is started.
During this period, the water temperature is maintained above 15° C.
The function can be stopped at any time:
Stop the absence
Viewing energy savings:
Displays the heat pump's and the electric backup's rate of use over the
last 7 days, the last 12 months, since commissioning.
Viewing electrical consumption:
Displays energy consumption in kWh, over the last days,
the last months, the last years.
Viewing the settings overview:
Displays all settings saved in the water heater.
Set the date and time:
Set the day and confirm. Then set the month, year, hour and minutes.
Set the operating ranges:
Sets the authorised product start-up ranges.
Set the language:
French, English, Dutch, Spanish, Portuguese, German, Italian and Polish.
Electrical backup:
Deactivates the electrical backup operation.
70