Safe Handling; Product Description; System Components; Components Necessary For Use - Aesculap Suhl FAV5 Instrucciones De Manejo

1.

Safe handling

Risk of death by electric shock!
Do not open the product.
Only ever connect the product
DANGER
to power mains with equipment
grounding conductor.
Prior to use, check for proper condition and
functioning of the product.
Observe our "Notes
Compatibility (EMC)".
To prevent damage caused by improper setup or
operation, and in order not to compromise
warranty and manufacturer liability:
– Use the product only according to these
instructions for use.
– Observe all safety information and maintenance
advisories.
– Ensure the manufacturer's approval before using
accessories that are not mentioned in the
instructions for use.
Ensure that the product and its accessories are
operated and used only by persons with the
requisite training, knowledge or experience.
Keep the instructions for use accessible for the
user.
Always adhere to applicable standards.
Ensure that the electrical facilities in the room in
which the device is being used conform to IEC
norms.
Unplug the device by pulling the plug, but never by
pulling the power cord.
Do not operate the product in explosion-hazard
areas.
Do not use the product if it is damaged or
defective. Set aside the product if it is damaged.
on Electromagnetic
Note
The device can be used by children over the age of 8 as
well as by persons with reduced physical, sensory or
mental capacities or with lack of experience and
knowledge, if these persons are supervised or have been
instructed on how to use the device safely, and if they
understand the risks associated with the use of the
device.
Do not allow children to play with the device.
Do not allow children to carry out cleaning and
maintenance of the device without supervision.
2.

Product description

2.1 System components

Designation
Clipper FAV5
Instructions for use
Note
The shearing head GT330 #10 (USA+UK) for Clipper
FAV5 is included in the scope of delivery. Various
shearing heads (SNAP ON type) can be used for
different applications!

2.2 Components necessary for use

• Clipper FAV5
• Shearing head
Art. no.
GT105G
GT105J
GT105K
GT330 #10 (USA+UK)
TA012748
3