König Electronic HAV-CR25GR Manual De Uso página 4

4. SETTING AND SYNCHRONIZING THE TIME
1. The flip clock is controlled by the digital clock with LCD display. Setting the flip clock requires
synchronizing the flip display with the time shown on the LCD.
2. To set the digital clock, press and hold the time key [5] for 3 seconds. The hour digits will flash.
Adjust hour by pressing the ▲▼ keys [1]. Press time key [5] to set hour. Adjust minutes by
pressing the ▲▼ keys [1]. Press time key [5] to set and start the clock.
3. To set the flip clock, use the flip display adjustment wheel [15] on the back of the unit to match the
time on the flip clock display with the digital clock. Only turn the flip display adjustment wheel [15]
in the direction indicated. Turning the wheel in the reverse direction will permanently damage the
clock mechanism.
5. SETTING THE ALARM
1. Press and hold the alarm key [6] for 3 seconds until the LCD display shows "alarm" and the hour
digits are flashing. Adjust hour by pressing the ▲▼ keys [1]. Press alarm key [6] to set the hour.
Adjust minutes by pressing the ▲▼ keys [1]. Press alarm key [6] to set minutes. The LCD display
will show the "alarm" icon and the alarm time.
2. If the alarm is set, the LCD display will show the alarm time. Pressing the time key [5] will display
the time on the LCD for 5 seconds. If the alarm is not set, the LCD will show the time.
3. The alarm can wake you by either radio or buzzer. Use the alarm mode slide switch [11] on the
back to toggle between "alarm to buzzer" and "alarm to radio".
- For "alarm to radio": alarm volume follows the last set volume used in radio mode.
- For "alarm to buzzer": volume level is fixed at a pre-set level.
4. Press the snooze button if you wish to suspend the alarm by 10 minutes.
5. For "alarm to radio", the radio will turn on for 5 minutes.
- Press alarm key [6] to turn off radio.
- Press snooze key [3] to suspend the radio for 10 minutes.
6. For "alarm to buzzer", the buzzer sound will turn on for 1 minute.
- Press alarm key [6] to turn off the buzzer.
- Press snooze key [3] to suspend the buzzer for 10 minutes.
- If no key is pressed within 1 minute, the alarm will snooze for 10 minutes and turn off again.
6. TURN ON NIGHT LIGHT
Turn on the night light by turning the backlight dimmer knob [9] clockwise for the desired brightness.
When the backlight dimmer knob is turned fully counterclockwise, the light is switched off. Press light
key [7] to toggle the night light on/off.
7. OPERATING THE RADIO
1. Press the radio on/off button [4] to turn on.
2. To select between FM/AM radio, use the FM/AM slide switch [13] on the back of the unit to select
AM or FM band.
3. Choose a station by using the tuning wheel [8] for the desired frequency.
4. Adjust the volume by turning the volume wheel [2].
5. Press the radio on/off button [4] again to turn the radio off.
8. SLEEP MODE
Sleep mode will play the radio for a set time and then automatically switch off. The duration of sleep
mode is set using the sleep time switch [12] on the back of the unit. The options are 30, 60 or
90 minutes. To activate sleep mode, first switch the radio on, using the radio key [4]. Then press and
hold the snooze/sleep key [3] for 2 seconds. This will activate the sleep function. The LCD display will
alternate every 3 seconds showing the minutes remaining in sleep mode and the time. If the alarm is
4