Menu Public Data; Menu Background Settings - Team Electronic HAM MobileCom 1011 Manual De Instrucciones

1. Press and hold the key【PUSH】(14) for appr. 2 seconds to open the menu.
2. Turn the rotary channel selector (14) to make your selection.
3. Push the key【PUSH】(14) to access the available settings for the function.
4. Turn the rotary channel selector (14) to make your selection.
5. Confirm the selection by pressing the key【PUSH】(14).
6. Press any key to exit the menu.
No. Function LCD Symbol
1 Hi-cut HIC
2 NB NB
3 Echo ECHO
4 10kHz 10k
5 Roger RB

MENU BACKGROUND SETTINGS

1. Push and hold the key【MENU】(5) for appr. 2 seconds to open the menu.
2. Turn the rotary channel selector (14) to make your selection.
3. Push the key【PUSH】(14) to access the available settings for the function.
4. Turn the rotary channel selector (14) to make your selection.
5. Confirm the selection by pressing the key【PUSH】(14).
6. Press any key to exit the menu.
32

MENU PUBLIC DATA

settings and description
receipt tone type; ON / OFF
Noise Blanker; ON / OFF
Echo; ON / OFF
frequency shift +10 kHz; ON / OFF
Roger Beep; 1-8, OFF
No. Function LCD Symbol settings and description
1 BEEP BP beep tone; confirms any entry; ON / OFF
2 INDIC OFF : transmit frequency during transmission
SWR : SWR during transmission
TOT : remaining TOT time during transmission
DC : indicates voltage during transmission
3 MIC microphone sensitivity; 1-36
4 NOG monitor sensitivity; 1-32, OFF
5 TOT transmit time limiter; OFF, 30-600s in 30-seconds-steps
6 TSR SWR protection, protects the radio if SWR is out of limit; ON / OFF
limit has to be programmed via software
7 TDC Voltage protection, protects the radio if voltage is out of limits; ON / OFF
min. and max. limits, to be programmed via software
8 SCM channel scan types
SQ : signal
TI : time
9 FIN frequency fine-tuning
OFF
R : reception frequency fine-tuning
T : transmission frequency fine-tuning
RT : reception and transmission fine-tuning
10 COLOR LCD color; WHITE, BLUE, GREEN, YELLOW, RED, PURPLE, CYAN
11 TX REP for repeater operation, tx frequency shift; range: 100Hz - 5MHz
12 FR--CH settings: CHAN
13 ASQ automatich squelch
preset in the range 1-9
14 RESET reset to factory settings
OPT : all settings and functions
ALL : all frequencies, settings and functions
FREQ
33