Malfunctions - kiwy S 123 Manual De Instrucciones

3 Check that the vehicles seat belt has not become twisted or
trappedin any way.
4 Check that the vehicles seat belt is fully tightened and the car seat
is held firmly against the vehicle seat .
5 Check that the safety harness of the child car seat is adjusted and
tensioned correctly.
6 Check that the safety harness buckle of the child car seat is fastened
correctly.
7 Check regularly all important parts for possible damage.
8 Check the correct operation of all components.
9 Check that the child seat does not get jammed in the car door, seat
runners, etc. in order to prevent breakage, damage, wearing etc.
Remember: Although this child seat has been designed and approved
by the latests ECE Standards, an incorrect installation or use may not
guarantee your child in case of accident.
So, always follow the check list above before starting any journey with
the car seat fitted in your vehicle.
Always check that the vehicle seat belt is correctly positioned before
placing your child in the S 123 child seat.
WARNING!
Any child seat tightly fixed on the vehicle seat may leave signs, due to
the measures to be adopted in compliance with the Safety
Standards. This seat is designed to minimize this phenomenon.
The manufacturer is not liable for possible signs resulting from the
normal use of this seat.
VI. Malfunctions
In case of incidental dropping or any evident damage, your child seat
must be inspected by the manufacturer.
Any malfunction of the harness may endanger your child protection.
In case of buckle malfunction, do not use this seat and consult your
detailer.
11