Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
There may still be dust or production residues on the ap-
pliance. We recommend that you clean the appliance as
described under "Cleaning".
Description of parts
1 Lid
2 Mixing attachment
3 Handle
4 Jug
5 Scale
6 Base
7 Buttons
8 Mains plug
Instructions
Location
A skid-proof, even surface is suitable as installation location.
Electrical connection
1. Ensure that your mains power corresponds with the speci-
fications of the appliance. The specifications are printed on
the type label.
2. Connect the mains cable to correctly installed and earthed
socket.
Switching on / off
•
You can turn the appliance on and off with the function
keys. The buttons light up to indicate the function.
•
The appliance will also shut off automatically with the func-
tions
and
. The turn-off time varies depending on
the jug contents and function. (approx. 4 minutes)
•
If you would like to abort the process before-hand, press
the previously selected function key one more time. Alter-
natively you can remove the jug from the base.
Button Functions
Cold frothing or stirring
Hot stirring, e.g. sauces, milk or drinking chocolate
Frothing / heating milk or drinking chocolate
Assembly/disassembly of mixing attachments
You will find the accessories on the underside of the base and
in the jug.
•
Select a mixing attachment and press it onto the shaft at
the bottom of the jug.
•
To detach the mixing attachments, pull them upwards.
NOTE:
The mixing attachments can be detached more easily if you
remove the jug from the base beforehand.
Capacity
The jug holds between 100 and 300 ml. Refer to the scale on
the jug.
Frothing milk
CAUTION:
Observe the capacity marking MAX, otherwise the milk will
foam over.
NOTE:
•
For optimum results use milk with 3.5% fat content and
fill in 225 ml.
•
Milk with 1.5% fat content and soy milk or lactose-free
milk does not froth as well.
Heating up drinking chocolate
CAUTION:
•
Only add the cocoa powder after the milk, otherwise the
mixing attachment will clog up otherwise.
•
Do not fill above the MAX mark, otherwise the beverage
will overflow.
Operation
Use a mixing attachment and the function key for the applica-
tion according to the following table.
Usage - desired result
Frothed milk
Heated milk or drinking chocolate
Hot liquids, e.g. sauces
Cold frothed or stirred liquids
1. Fit a mixing attachment.
2. Fill the liquid into the jug.
3. Put on the lid.
4. Press a function key.
5. Either wait for the automatic shut-off or press the function
key again to cancel the operation.
6. If you want to end the operation, disconnect the mains
plug.
Mixing at-
Button
tachment
2a
2b
2b
2a or 2b
29
Publicidad
Tabla de contenido
