Sperian Miller DURAHOIST Serie Instrucciones De Uso página 18

6.3 Installation of DH-12 Vehicle Hitch
Mount Sleeve & Accessories
6.3.2 Mounting the DH-13 Vehicle Hitch Mount 2' Extension
to the DH-12 Vehicle Hitch Mount Sleeve
1
Insert the DH-13 into the hitch
receiver and pin into position.
2
Insert the DH-12 into the DH-13
receiver and pin through hole set.
6.3.3 Mounting the DH-14 Universal Joint Assembly to the
DH-12 Vehicle Hitch Mount Sleeve
1
Insert the DH-14 into the hitch
receiver and pin into position, as
shown.
2
Attach the DH-12 to the DH-14 by
inserting the bolt through the hole
sets, as shown.
USE R I N S TR U C TIO N S - E N G L I SH
The 2' Extension installs between the DH-12 and the attendant vehicles to provide
extra distance that may be needed between the vehicle and entry point.
The Universal Joint Assembly installs between the standard model DH-12 Hitch
Mount Sleeve or DH-13 Hitch Mount Sleeve Extension and the attendant
vehicle to conpensate for uneven ground conditions on the job site.
18
1
2
1
2