Setting The Oven Timer; Setting The Cooking Time & Power Level - Danby DMW902W Manual Del Propietário

C.Notes on setting the clock.
• IF YOU MAKE A MISTAKE in setting the
correct time, start oven by pressing the
CLOCK pad twice.
• TO RECALL TIME OF DAY WHILE YOU
ARE COOKING, press the CLOCK pad.
Time of the day will be displayed for 3
seconds before returning to displaying the
counting down of the cooking time.
• IN CASE OF POWER FAILURE, when the
power has been restored, the control will be
in a clock set mode. Follow the directions
for setting the clock.
• BEEPS DURING OVEN SETTING ONE
BEEP: Oven accepts the entry. Information
has been entered in the correct sequence.
TWO BEEPS: Oven does not accept the
entry. Check and try again.

2.SETTING THE OVEN TIMER

A. Timer works independently of cooking and
can be set anytime for various kitchen
tasks. Use oven timer even though oven is
also timing a microwave cooking function.
Set time as follows:
• Touch the TIMER pad. Word prompts
ENTER TIMER TIME show on the display. if
you are using the TIMER while cooking in
the oven : Cooking time countdown will be
temporarily replaced on the display while
timer is being set.
• Enter the amount of time you wish to set by
touching the correct number pads. Digit time
is in minutes and seconds and set left to
right. Set one digit (a 5 for 5 seconds) or up
to four digits(2405 for 24 minutes, 5 sec-
seconds). ENTER TIMER remains on
the display.
• Touch START/STOP pad. Word prompt
TIMER starts flashing and timer begins
counting down. If you are using the TIMER
while cooking in the oven : TIMER starts
flashing and timer countdown can be seen
on display for 3 seconds before cooking
time is returned to display. Word prompt
TIMER is displayed alone with additional
word prompt indicating current
cooking mode.
B. Notes on setting the oven timer.
• TO STOP OR RESET TIMER when cook-
ing is not taking place, touch RESET pad.
• WHEN SETTING TIMER DURING A
COOKING OPERATION take care to set
timer correctly. Once the timer is set during
cooking, setting cannot be changed without
resetting the cooking function at the same
time. Touching RESET will not allow you to
change timer setting while cooking.
• When end of time has been reached, one
long beep can be heard and timer will leave
the display. If oven is not cooking, CLOCK
and time of day (if set) will return to the dis-
play. If oven is in cooking operation, one
long beep can be heard and TIMER will
leave display while oven is continuing cook-
ing time countdown.
3.SETTING THE COOKING TIME &
POWER LEVEL
A. QUICK & EASY
When cooking at 100% power, simply set
cook time by touching number pads( for
example, 3 minutes: touch 3-0-0) and
START. 100% power is automatically set.
For 1-step cooking, you do not have to
touch COOK pad before setting time.
B TO COOK AT LOWER POWER LEVELS
After setting cook time, touch POWER pad
then single digit representing the power
level desired. Touch START pad. Since
oven automatically assumes 100% power,
you must switch power level (when desired)
after setting cook time.
USE THESE SINGLE DIGITS TO
REPRESENT POWER LEVELS
Digit
9
8
7
6
5
4
3
2
1
If you are cooking at a lower power level and
wish to return to 100% power, press the
POWER pad twice.
8
% of Power
90%
80%
70%
60%
50%
40%
30%
20%
10%