Mounting The Microwave Oven; Nylon Grommet; Self Aligning Machine Screw - Danby DOM014401G1 Manual De Instalación

INSTALLATION INSTRUCTIONS - OUTSIDE TOP EXHAUST

Mounting the microwave oven

Two people should be used to install the microwave.
Do not grip or use the handle during installation.
If the surrounding cabinets are metal, use the nylon
grommet around the power cord hole to prevent
damage to the cord.
When mounting the microwave, thread the power
cord through the hole in the cabinet. Keep the cord
tight when mounting the microwave to ensure the
cord does not get pinched. Do not lift the microwave
by the cord.
1. Lift the microwave, tilt it forward and hook the
slots on the back of the microwave onto the
lower tabs of the mounting plate. Rotate the
front of the microwave against the bottom of the
cabinet.
2. Insert two self aligning machine screws with
washers through the top cabinet holes and
tighten two turns.
3. If the cabinet has an overhang, insert the wood
fi ller blocks before completely tightening the
screws.
1

nylon grommet

metal cabinet
2
Turn two full turns on each screw.
3
Cabinet Front
Cabi
Microwave Oven top
13
power cord
power cord
hole
self-aligning
machine screw
washer
Washer
Filler Block
Equivalent to
Depth of Cabinet
Recess
Sel f-Aligning machine Screw