Controls & Features - Cub Cadet RT 65 Manual Del Operador

Controls & Features
NOTE: This Operator's Manual covers several models. Garden
tiller features may vary by model. Not all features in this manual
are applicable to all garden tiller models and the garden tiller
depicted may differ from yours.
Engine Controls
See the separate Engine Operator's Manual for information and
functions of the engine controls.
Gear Selection Handle
The gear selection handle is
located in the center of the
handle on the tiller. It is used
to select NEUTRAL, REVERSE,
or one of the FORWARD
modes on the shift lever
indicator. See the Operation
section for more information.
10
Gear Selection Handle
Handle Adjustment Lock
Shift Lever Indicator
F
R
N
TINE S TINES WHEELS
FORWARD REVERSE FORWARD
U
CULTIVATING GROUND BREAKING
TILLING SOFT SOIL TILLING HARD SOIL ( )
NO TINE ACTION
FORWARD
WHEEL DRIVE
i23106
Depth Stake
Figure 4-1
Clutch Control
The clutch control is located beneath the handle. Squeezing the
clutch control against the handle engages the wheel and tine
drive mechanisms.
Handle Adjustment Lock
The handle may be adjusted to the height desired. Loosen the
handle height adjustment lock a few turns. Pivot handle up or
down to desired position and tighten the lock.
Depth Stake
The depth stake controls the tilling depth. Refer to the Operation
R Section.
E E
V
T E
R
R
S
A
E
L
Clutch Control
4