Miele STB 201 Instrucciones De Manejo página 11

Turbobrush features
The Turbobrush is operated by the
suction power of the vacuum cleaner.
It has a rotating roller brush which is
very effective at picking up thread,
hairs and fluff.
Four rollers maintain the brush 1.5 mm
away from the floor.
Recommended use
The Turbobrush is particularly suitable
for vacuuming thread and hair from cut
pile carpeting.
The normal floorhead or one of the
Miele floorbrushes should be used for
cleaning hard floors, such as tiled or
parquet floors.
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
The following should not be
vacuumed using the Turbobrush:
– Floor surfaces with a variable or
uneven profile. The brush might
come into contact with the floor and
cause damage.
– Carpets such as Saxony with very
long pile, berber or sheepskin rugs
and valuable hand-knotted carpets,
e.g. Persian or similar. There is a
danger of the threads being pulled
out.
Using the Turbobrush
^ To achieve the best effect, pass the
Turbobrush slowly backwards and
forwards over the carpet or floor
covering.
For carpets with fringes always draw
the Turbobrush from the carpet across
the fringe towards the rest of the floor.
en - Use
11