Taurus Mycook 1.8 Manual De Instrucciones página 10

ENGLISH
Figure 17
Figure 18
Figure 19
Figure 20
Figure 21
To insert the blades into the jug:
1. Place the blades into the jug fitting, being careful
not to cut yourself (Figure 19).
2. Turn the jug, securing the blades in the fitting with
your hand (Figure 20).
3. Fit the jug stand (with attachment clamp in the
open position) onto the blade and the three pivots of
the jug base (Figure 21).
4. Turn the clamp 180º to a closed position, ensuring
that it is fully locked
CAUTION.
The blade flange must be properly fitted at all ti-
mes. Take special care when handling the blades
as they are very sharp.
NEVER IMMERSE THE BLADES IN WATER OR
WASH THEM IN THE DISHWASHER AS THE IN-
TERNAL MECHANISM MAY BECOME DAMAGED
IF ANY WATER WERE TO GET INSIDE.
Spatula
(Figure 23)
The spatula is used to remove food, to prevent it stic-
king to the sides of the jug and to help to empty the
jug.
Figure 22
10
(Figure 22).