Taurus Mycook 1.8 Manual De Instrucciones página 14

ENGLISH
00 30
Figure 32
00 28
Figure 33
00 00
BEEP!
Figure 34
Activation scale:
• From 0 to 1 minute:
Counted in seconds.
• From 1 to 10 minutes:
Counted in 30 second intervals.
• From 10 to 90 minutes:
Count in minutes.
Turning the control quickly allows a faster selection.
Kneading key
(Figure 33)
Press the button to activate the Kneading function.
The light up display lights up in green and the opera-
tion timer begins.
Press the button to deactivate the Kneading function.
The LED display turns off.
Once the pre-selected operation time for the knea-
ding function has elapsed, the appliance sounds
an audible warning and the light flashes on and off
(Figure 34).
To stop:
Press the kneading key once again.
This is the recommended function to prepare a stan-
dard mixture for all kinds of doughs.
THE KNEADING FUNCTION IS ACTIVATED WHEN
THE MACHINE IS NOT RUNNING. THIS FUNCTION
SHOULD NOT BE ACTIVATED IF THE JUG TEM-
PERATURE IS OVER 60º C.
TURBO speed key
(Figure 35)
Keep the key pressed DOWN to activate the Turbo
function, and the 10 maximum speed indicators will
light up (Figure 35).
If working in cold mode: Once the key has been re-
leased, the Turbo function is disabled. The maximum
speed LED displays turn off.
14