Pairing The Sensors - Pioneer SGX-CA900 Guía Rápida De Inicio

2
Tap [Date & Time] and set the
date and the time.
Touch the (BACK) button after
you've completed your settings.
Time Zone Select a time zone.
Date Enter the date.
Time Enter the time.
24-Hour Check the box to display time
Format in 24 hour format.
Date Select the date format.
Format
3
Tap [Close].
The Initial Setup is finished and
CycloMeter starts.

Pairing the Sensors

Pair the SGY-PM900 Pedaling Monitor
Sensor or other ANT+ sensors to the
device.
Before pairing the sensors
• Make sure that the sensors that you
want to pair are activated.
• If more than one sensor is activated,
bring the device close to the sensor
or specify the device number to pair.
Refer to the User's Guide about how
to specify the device number.
• If you use the speed sensor
sold separately and the wheel
circumference is different, set the
wheel circumference. The wheel
circumference is set to 2096 mm by
default. For details, refer to the Users
Guide.
EN
Basic Operation
17