Villaware FPVLJESL01 Manual De Instrucciones página 8

after using your juice extractor
Before cleaning and storing your juice extractor, follow the instructions below to disassemble
the unit:
• Turn juice extractor off "
• Remove food pusher from food chute.
• Press locking latch to the right to unfasten clamp, then lift the cover up and remove it
from the juice extractor.
• Use the flat portion of the cleaning tool to scoop excess pulp from the top of the unit
and cover into the pulp collecting container.
• Remove the cup and the pulp collecting container by tilting it slightly.
• In order to remove the filter basket and the filter, hold the filter basket with two hands
then lift it straight up. The stainless steel filter basket contains small sharp blades for
cutting and processing fruits and vegetables. Do not touch blades when handling the filter
basket.
cleaning
• Turn juice extractor off "
• Disassemble all removable parts of the juice extractor . All parts except the base are
dishwasher safe. The filter basket, stainless steel filter and food pusher should be placed
on the top shelf of the dishwasher . Select the minimum temperature.
• It is very important to keep the filter clean and free of residues
that block the holes to ensure optimal performance. Use
the nylon brush that comes with the unit to clean it thoroughly, as
needed (Figure 7).
• Wipe the motor base with a damp or dry cloth.
• Do not immerse the motor base in water or any other liquid.
• When hand washing, avoid soaking parts in detergent for too long.
• Verify that dishwashing detergents are suitable for cleaning plastic items.
" and unplug it from the electrical outlet.
" and unplug it from the electrical outlet.
7
Figure 7