Changing The Pin Code; Setting The Dialling Mode; Flash Time Duration - OGATECH OG-S60 Serie Manual De Usuario

OGATECH OG-S60/TWIN/TRIPLE/QUATTRO
5. Press OK
6. Enter the name
7. Press OK to validate
While entering the name, press 'c' to delete a character and press and hold
menu without taking any modifications into account.
4.6

Changing the PIN code

Certain functions are only available to users who know the PIN code. By default this is PIN
code = 0000.
To change the PIN code:
1. Enter the menu by pressing
2. Select SETUP using the up
3. Press OK
4. Select PIN CODE using the up
5. Press OK
6. Enter the old 4 figure PIN code.
7. Press OK
8. Enter the new 4 figure PIN code
9. Press OK
10. Enter the new PIN code a second time
11. Press OK to validate
4.7

Setting the dialling mode

There are two types of dialling mode:
• DTMF/Tone dialling (the most common)
• Pulse dialling ( for older installations )
To change the dialling mode:
1. Enter the menu by pressing
2. Select setup using the up
3. Press OK
4. Select DIAL MODE using the up
5. Press OK
6. Select the dialling mode using the up
7. Press OK to validate
4.8

Flash time duration

1. Enter the menu by pressing
2. Select SETUP using the up
3. Press OK
4. Select RECALL using the up
5. Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time
(250ms)
22
/OK
and down keys
and down keys
/OK
and down keys
and down
and down
/OK
and down keys
and down keys
keys
keys
OGATECH OG-S60/TWIN/TRIPLE/QUATTRO
to exit the