Automatic Answer; Reset; Keypad Lock - OGATECH OG-S60 Serie Manual De Usuario

4.9

Automatic answer

When there is a incoming call and the handset in on the base, the phone automatically takes
the line when lifted. This is the default setting, but can be set OFF:
1. Enter the menu by pressing
2. Select HANDSET using the up
3. Press OK
4. Select AUTO ANSWER using the up
5. Select ON (for automatic answer) or OFF
6. Press OK

4.10 Reset

It is possible to return the phone to the original default configuration. This is the configuration
which was installed when you first received the telephone.
To return to default settings:
1. Enter the menu by pressing
2. Select SETUP using the up
3. Press OK
4. Select DEFAULT using the up
5. Press OK
6. Enter the 4 digit PIN code (default =0000). Press OK.
7. Press again OK to validate
DEFAULT PARAMETERS ARE:
Low battery beeps
Out of range warning beeps
Key click
Auto answer
Internal melody
Internal volume
External melody
External volume
Ear volume
Phonebook
Call log list
Redial list
Pin code
Dial mode

Keypad lock

Returning to default settings will delete all entries in the phonebook and call
log. The PIN code will also be reset to 0000.
4.11 Keypad lock
The keypad can be locked so that no settings can be changed or no telephone number can
be dialed. The -icon will appear on the screen when keypad is locked.
OGATECH OG-S60/TWIN/TRIPLE/QUATTRO
OGATECH OG-S60/TWIN/TRIPLE/QUATTRO
/OK
and down keys
and down
/OK
and down keys
and down keys
ON
OFF
ON
ON
1
3
3
3
3
Empty
Empty
Empty
0000
DTMF
OFF
keys
23