Safety Instructions
·
Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
·
Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
·
This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to
rain or moisture.
·
Make sure there are no flammable materials close to the unit while operating.
·
The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
·
Maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate fixture at temperatures higher
than this.
·
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center.
·
Never connect the device to a dimmer pack.
·
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect from
power via breaker or by unplugging it.
·
Make sure the power cord is never crimped or damaged.
1. Before You Begin
Please read these instructions carefully. It includes important information
about the installation, usage and maintenance of this product.
8