SKYLOTEC CONREST SAN-9100 Instrucciones De Uso página 8

5.) Fixation of the Leg Rest (Should only be used as an optional
extra in certain circumstances)
• Place feet of the casualty in the Foot rest
• Place straps with plastic buckles around ankles and close
buckles
• Attach attachment slings (bridles) in the grey metal suspension
eyes of the Leg Rest. Fix the other end of the attachment
slings (bridles) in the rescue device.
Max. rated load: 150kg
General Information
Information – read carefully
Read and understand this manual before using this product. The
manual must be available in the national language at all times. If
not available, then the vendor has to resolve this matter with
SKYLOTEC prior to sale. The instructions must be made available
to the user. The equipment may only be used by professional
users, who have received training in its safe usage and who
possess the required knowledge. A rescue plan must be available
for any eventuality. It must be possible to implement rescue
measures in a timely manner.
Rescue system
A rescue system consists of the illustrated individual components
and may only be used with tested and approved components under
the described application conditions; failure to comply represents a
risk of serious or fatal injury. Anchoring points should be selected/
positioned directly above the victim, if possible.The anchor point
must meet regional requirements (eg. EN 795) for the scope of
application. Also, the substructure to which the anchoring device is
fastened, and the connecting elements have to be able to withstand
the load.
Prior to use
Check the complete personal protective equipment (PPE) and its
individual components for damage, cracks or wear (including
snaphooks, straps, textile and metal components, adjusting
devices, locks); complete function must be assured. If unsure the
component is in a safe condition, remove immediately.
The equipment must be immediately removed from service after a
fall and checked by an expert. If it can no longer be used, it must be
disposed.
Safety requirements
The instructions on protecting the user and the equipment must be
strictly complied with! The product label must be completely legible!
In order to avoid a suspension trauma in case of a fall, there must
be an rescue plan available that is designed to reduce the amount
of time suspended while wearing a harness, and consequently to
prevent a circulatory collapse.
8 8