Storage; Cleaning; Decalcification; Troubleshooting - Profi Cook PC-TK 1165 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
CAUTION:
Always shut off the appliance before removing it from the
base!
WARNING: Risk of burns!
• When pouring the water out, keep the lid closed.
• During operation the housing becomes hot. Do not
touch it and allow the appliance to cool down before
storing it away.
• Remove the mains plug.
• Emptying the water container.
WARNING:
• Always turn the appliance off before cleaning it and remove the
mains plug. Wait until the appliance has cooled down.
• Never immerse the appliance or the base in water or other liq-
uids. This may result in electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
• For ease of cleaning, you can separate the tea strainer
from the lid. Twist and remove the handle from the tea
strainer. Now you can pull the push rod out of the lid.
• Rinse out the water jug and the tea strainer with clear
water. Dry everything with a cloth.
• Clean the housing after use with a slightly damp cloth.

Decalcification

• The frequency of the decalcifying operation depends
on the hardness of the water and on how often the
appliance is used.
• If the appliance switches off before the water boils, it
probably needs to be decalcified.
• Please do not use vinegar but a commercially available
decalcification agent on the basis of citric acid. Only use
the quantities stated in the instructions.
NOTE:
After descaling the appliance boil fresh water in it several
times (approximately 3 - 4 times) in order to remove any
residues. Do not consume this water.
40
PC-TK1165_IM
• Clean the appliance as described and allow it to dry.
• We recommend that you keep the appliance in the origi-
nal packaging if it will not be used for long periods.
• Always store the appliance out of the reach of children in
a dry, well ventilated place.
Mains Cable Take-Up Appliance
The mains cable can be wound up on the base.

Cleaning

Problem
Possible Cause
The appliance
The appliance has
does not
no power supply.
function.
The appliance is
faulty.
The appliance be-
comes overheated
after operating
without or with too
little water.
The appliance
The inside of the
switches off
water kettle is
before the
stained with ex-
water has
cessive limestone
boiled.
or the circuit of
the wall socket is
overloaded.

Storage

Troubleshooting

Remedy
Check the socket
with another appli-
ance.
Plug in the mains
plug correctly.
Check the main
circuit breaker.
Contact our service
centre or a spe-
cialist.
Take the kettle from
the base.
Rinse out the kettle
with cold water.
Allow the appliance
to cool for 15 min-
utes.
Descale the appli-
ance as instructed.
Check the mains
connection.
13.12.18

Publicidad

Tabla de contenido
loading

Tabla de contenido