Storage; Cleaning; Decalcification; Troubleshooting - Profi Cook PC-WKS 1012 Instrucciones De Servicio

Электрочайник PROFI COOK PC-WKS 1012
Купить в интернет-магазине http://clatronic-shop.com.ua
CAUTION:
Do not remove the appliance from the base
without switching it off beforehand.
The terminals on the base are not suitable for
interrupting the power supply.
WARNING: DANGER OF SCALDING!
• When pouring the water out, keep the lid
closed.
• During operation the housing becomes hot.
Do not touch it and allow the device to cool
down before storing it away.
• Remove the mains plug.
• Emptying the water container.

Storage

• Clean the appliance as described and allow it to
dry.
• We recommend that you keep the appliance in
the original packaging if it will not be used for
long periods.
• Always store the appliance out of the reach of
children in a dry, well ventilated place.
Mains Cable Take-up Device
The mains cable can be wound up on the base.

Cleaning

WARNING:
• Always turn the device off before cleaning
it and remove the mains plug. Wait until the
device has cooled down.
• Never immerse the device or the base in
water or other liquids.
This may result in electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive
objects.
• Do not use any acidic or abrasive detergents.
• Rinse the water container out with clean water.
Then dry it off with a cloth.
• Clean the housing after use with a slightly damp
cloth.
34
• There is a permanent filter in the spout. In order
to clean the filter, pull it out with the lid open.
Rinse out the filter with running water. Reinsert
it, taking note of the guide mechanism.

Decalcification

• The frequency of the decalcifying operation
depends on the hardness of the water and on
how often the appliance is used.
• If the machine switches off before the water
boils, it probably needs to be decalcified.
• Please do not use vinegar but a commercially
available decalcification agent on the basis of
citric acid. Only use the quantities stated in the
instructions.
NOTE:
After descaling the device boil fresh water in it
several times (approximately 3-4 times) in order
to remove any residues. Do not consume this
water.

Troubleshooting

The appliance does not function
Possible cause:
The appliance has no power supply.
Action:
• Check the socket with another appliance.
• Plug in the mains plug correctly.
• Check the main circuit breaker.
Possible cause:
The appliance is faulty.
Action:
• Contact our service center or a specialist.
It is not possible to switch the machine on.
Possible Cause:
After being used without or with too little water the
machine has not cooled down sufficiently.
Remedy:
• Allow the machine to cool down for 15 min.