Sony TRINITRON KV-20FS100 Manual De Servicio página 101

Operating Instructions
TV and Satellite Receiver
Satellite Receiver
1
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.


You can use the


For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO
does not provide sound; the audio cables must still be connected.
8
From
cable/
antenna
2
3
button to switch between the VHF/UHF and VIDEO inputs.
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)