NOTE:
• The values increase fast forward. Press
and hold the TIMER button and press the
HOUR or MIN button once per value to
reset an individual value.
• You exit the programming mode upon
releasing the TIMER button.
9. Press the TIMER button once to start TIMER
operation. The ON-OFF button lights up blue.
NOTE:
• The appliance switches on automatically
at the preset time. The ON-OFF indicator
lamp changes from blue to red.
• Press the TIMER button once to deac-
tivate TIMER operation. The ON-OFF
button indicator lamp turns off.
• Press the ON-OFF button once to start the
coffee making process earlier. The
ON-OFF indicator lamp changes from blue
to red.
The Coffee Is Ready
NOTE:
The brewing process lasts approximately
10 minutes.
• When no more coffee is flowing through the
filter you can remove the pot.
• Turn the device off.
• Would you like to keep the remaining coffee
warm? Leave the machine switched on until the
pot is empty.
NOTE:
The filter holder can be removed from the ma-
chine by its handle.
This makes it easier to dispose of the old coffee
filter, for example.
De-scaling
De-scaling is necessary when the brewing time
increases substantially.
38
• Use only commercially available citrus acid-
based de-scaler.
• Follow the recommended instructions for use.
WARNING:
• Afterwards you should boil fresh water in the
pot three or four times in order to rinse out
residues of the descaling agent.
• Do not use any coffee powder!
• Do not use this water for consumption.
Cleaning
WARNING:
• Before cleaning, always remove the mains
plug and wait until the device has cooled
down.
• Do not immerse the device in water. Other-
wise this might result in an electric shock or
fire.
CAUTION:
• Do not use a wire brush or any abrasive
items.
• Do not use any acidic or abrasive detergents.
• The exterior of the device should be cleaned as
necessary with a slightly damp cloth – without
any additives.
• Remove spilled coffee grounds with a paper
towel from the inner casing. Afterwards wipe
with a damp cloth.
• The coffee pot and the filter pad should be
cleaned by rinsing in warm water. Use a soft
brush if necessary.
Storage
• Clean the appliance as described and let it dry
completely.
• For longer periods of non-use we recommend
storing the appliance in its original packaging.
• Always store the appliance in a well-ventilated
and dry place out of reach of children.