Electric Cooktop Operation; Before Using The Cooktop For The First Time - Haier HCC2320AES Manual Del Usuario

Hot surface indicator light
Each element features a hot surface indicator light to show when the cooking area is
ON or hot. The signal light will turn on automatically in the area marked with a circle.
The light remains on as long as the surface cooking area is too hot to touch even
after the surface cooking area is turned off.

ELECTRIC COOKTOP OPERATION

BEFORE USING THE COOKTOP FOR THE FIRST TIME

•
All products are wiped clean with solvents at the factory to remove any visible
signs of dirt, oil, and grease which may have remained from the manufacturing
process.
•
If present, remove all packing and literature from the cooktop surface.
•
Clean your glass top. A thorough cleaning with a glass top cleaner is
recommended. It only takes a minute and puts a clean, shiny coating on the glass
top before its initial use.
•
There may be a slight odor during the first several uses: this is normal and will
dissipate.
•
Optimum cooking result depends on the proper cookware being selected and
used.
•
The cooking surface will hold the heat and remain hot over 20 minutes after the
elements have been turned off.
•
The glass ceramic cooking surface is a durable material resistant to impact, but
not unbreakable if a pan or other object is dropped on it.
•
Do not use aluminum foil directly on the glass; it will melt and damage the glass
surface.
•
Do not allow pans to boil dry. This can damage the pan, element and /or cooktop.
•
Never cook food directly on the glass.
•
Do not slide cookware across cooking surface it may scratch the glass
•
Using cast iron cookware on the glass cooktop Is not recommended. Cast iron
retains heat and may result in cooktop damage.
•
Food packaged in aluminum foil should not be placed directly on the glass
ceramic surface for cooking; aluminum foil can melt and cause permanent
damage.
9