Storage; Troubleshooting - Profi Cook PC-KG 1030 Instrucciones De Servicio

CAUTION:
• Do not use a wire brush or other abrasive
utensils for cleaning.
• Do not use aggressive or abrasive cleaning
agents.
Removing grill plates
WARNING: Risk of burns!
Wait until the grill plates are completely cooled!
1. Push down on the correct release button
RELEASE (3 or 7).
2. Pull the grill plates a short way forward or
upward. Remove them from the appliance.
3. Clean the grill plates in a bowl of hot water
while adding a mild dishwashing liquid. If
necessary, use a nylon brush. Rinse with clean
water.
4. Dry the grill plates well.
5. If necessary, wipe the surfaces below the grill
plates with a damp cloth.
6. Let the surface dry completely before you re-
insert the grill plates.
Re-inserting the grill plates
You will find the following allocation on the bottom
of the grill plates:
UPPER PLATE Upper plate
LOWER PLATE Lower plate
1. Slide the recesses on the grill plates into the
mounting brackets on the appliance.
2. Press the RELEASE button with one hand,
and simultaneously press the respective grill
plate into the housing with the other hand.
3. Ensure that the grill plates are firmly in place.
Fat Collecting Tray
1. Remove the fat collecting tray from the appli-
ance. Dispose of the contents.
2. Clean the fat collecting tray in warm sudsy
water.
3. Re-attach the fat collecting tray to the contact
grill when it is dry.
Casing
Clean the casing after use with a slightly damp
cloth.

Storage

• Only store the appliance clean and after it has
cooled down.
• During longer periods of non-use we recom-
mend storing the appliance in its original
packaging.
• Always store the appliance in a well-ventilated
and dry place out of reach of children.

Troubleshooting

• The appliance does not work
Possible cause:
The appliance is not connected to mains power.
Remedy:
• Check the wall outlet with a different appliance.
• Insert the plug properly in the wall outlet.
• Check the fuse.
Possible cause:
The appliance is defective.
Remedy:
• Contact our service or a repair center.
• A continuous beep can be heard
Possible cause:
A malfunction of the appliance.
Remedy:
1. Turn off the appliance with the
2. Disconnect from the mains.
3. Let the appliance cool down.
4. Clean the appliance as described above.
5. Only continue to work with a properly func-
tioning appliance. Should the error not be
remedied or should it repeat itself, contact our
service department or a specialist.
button.
53